| Category |
Proximity Sensors - Industrial |
| Manufacturer |
PANASONIC |
| Package |
- |
| Environmental performance_ Protective structure |
IP62 (IEC), drip-proof type II |
| Consumption current_ transmitter |
35mA or less |
| Environmental performance_ Operating ambient temperature |
0~+50℃ (Avoid Condensation and Freezing), Storage: -25~+70℃ |
| Detecting objects |
Transparent Objects >20x20mm, Translucent Objects >20x20mm, Opaque Objects >20x20mm, Holes >10x10mm |
| Cable extension |
When Using Cables Above 0.2mm², the Total Length of the Transmitter and Receiver Can Be Extended to 100m |
| Sending frequency |
Approximately 220kHz |
| supply voltage |
12~24V DC ±10% Ripple P-P Below 10% |
| Detection distance |
300mm |
| Material_ cable |
0.2mm² 4-Core (Transmitter: 2-Core) Rubber Cable, Length 5m |
| Work status indicator light |
Red LED (Lit When Output ON) |
| Sensitivity regulator |
Equipped with Continuous Variable Regulator |
| Output_ Short circuit protection |
Equipped |
| Environmental performance_ Impact resistance |
Acceleration 100m/s2 (approximately 10G) X, Y, and Z directions each 3 times |
| Material_ Shell |
Polycarbonate |
| reaction time |
Below 5ms |
| Output_ Remaining voltage |
Below 1V (when current is 100mA) |
| Environmental performance_ insulation resistance |
Between all power supply connection terminals and housing, above 20MΩ, high-resistance meter based on DC500V |
| Output_ Output action |
Select sound absorption when ON/insulation when ON by controlling input |
| Environmental performance_ Vibration resistance |
Frequency 10~55Hz, dual amplitude 1.5mm in X, Y, and Z directions for 2 hours |
| Output_ type |
NPN General Purpose Transistor |
| Environmental performance_ Operating environment humidity |
3585% RH, storage: 3585% RH |
| Output_ Maximum inflow current |
100mA |
| Environmental performance_ Voltage withstand |
AC 1,500V 1 minute between all power connection terminals and shell |